- Overview
- More Info
- Reviews
- Videos
When used with most power tools and shop vacuums, the Dust Right® Separator captures sawdust, wood chips, and other debris before it enters your vacuum, preventing the loss of suction power caused by a clogged vacuum filter.
- 10-gallon container is easy to empty yet holds twice as much as competitive solutions
- Translucent container makes it easy to see when it's time to empty
- Five-caster base gives it exceptional stability and makes it a breeze to maneuver around the shop
- Hose connections fit snuggly inside the in/out ports preventing unintentional disconnections
- Includes a 36" flexform hose that connects the Dust Right® Separator to any vacuum with a standard 2-1/4'' ID inlet port
- Shop Vac not included
- Patent pending
Note: The Dust Right® Separator creates a cyclonic air flow that causes most wood dust particles and other materials that are heavier than air to separate, preventing them from being passed to the vacuum. Not intended for fine airborne dust such as drywall dust. However, maximum performance can be expected when using the Dust Right® Separator in woodworking or general shop cleaning applications.
Due to the size of this item, there is an additional $50 shipping charge for International shipping.
The Shop-Vac® 5-1/2 HP 8-Gallon Industrial Wet/Dry Vac, Shop Vac Handle, Shop Vac Hose Kit, and Hose Holder are sold separately.
What's in the Box?
One Dust Right® Separator
|
| |
 |
|
Customer Reviews and Photos for:
Dust Right® Dust Separator
|
Average Rating:
4.0
(63 customer reviews)
$67.99
Add your review...
|
|
|
1) Submitted by
Darry Bonadio, from Evans, GA
on 6/16/2013
Customer Rating: 
After going through one vac filter and the new one clogging almost immediately, I decided to buy the Dust Separator. It does a great job and will save my replacing filters so often. Wish the connector hose was a little longer as it "just" reaches the wall vac. Great product, easy set up, and works!
|
|
2) Submitted by
Craig, from Murrells Inlet, SC
on 1/22/2013
Customer Rating:
After moving into a new home I finally set up my wood shop in my extended garage. The one thing I didn’t want was sawdust all over the place. I installed my existing dust collection system but didn’t want the hassle of cleaning or changing the vacuum filter. I received the dust right dust separator as a gift for Christmas. After assembling which took about five minutes I installed it and haven’t looked back. The filter in my vacuum still looks new even after several projects and the garage is 95% dust free. This is a must for anyone who loves to work with wood and does not have a dedicated shop. Rockler also has available additional items that I’ve purchased for my router, band saw, and sander.
|
|
3) Submitted by
Kenneth , from Whitewright, TX
on 6/9/2013
Customer Rating:
I saw a reveiw where a guy was having a problem with static. All I did was get some aluminum tape and a striped copper wire and a 2" washer. Tape the wire the full length down the side with enough wire hanging at the bottom to make a loop with the washer in it touching the floor. Make sure the washer is loose in the wire so it pivots on the floor but never not touches the floor. A perfect way to discharge the static. As for the tip over I glued a 5 lb flat round weight to the inside bottom, it's heavy enough to keep it upright but not to much when I dump it. This is a must have for any shop.
|
|
4) Submitted by
BK, from Waitsburg, WA
on 3/19/2013
Customer Rating:
Like many others, shop space is limited and so is the funding department. I just purchased a 15" planer and the Dust Right Dust Separator at the same time. I was a bit skeptical as to whether the Dust Right system and my shop vacuum could handle the load from the planer. On initial start up, I was more then impressed with the ability to keep up with the high volume of chips. If there is any down fall to the dust collection system, it would be that the vacuum and dust collection tub do take up space but with the casters and a clean floor, they are easily moved. The 4" dust port on the planer down to the 2.1/4" fitting is no problem, plenty of pull. It's worth the minimal expense to have this in any shop as it saves time and more important, your lungs.
|
|
5) Submitted by
PapaJoeT, from Ingleside, TX
on 12/6/2012
Customer Rating:
Anyone who has a 2.25" shop vac and does not have one of these needs to give serious thought to getting one. Does a great job at picking up both chips from my jointer and planer, and dust from other tools. My shop vac filter and lungs are still saying "Thank you!"
|
|
6) Submitted by
Davis, from Atlanta, GA
on 11/25/2012
Customer Rating:
I was very concerned with the products price at first but with the easy assembly and great construction, this product is worth every penny. I have a very old shop vac that has a filter that can't the amount of dust produced from woodturning. Hooking the separator up to the shop vac was very easy and emptying the canister is very easy. Rockler has made another great product and it's cool to see the chips flying around inside the can. Almost no dust, even the really fine dust from sanding doesn't make it to the shop vac. There is no loss of suction and you hardly have to clean the filter any more.
|
|
7) Submitted by
LG, from Ferndale, WA
on 10/27/2012
Customer Rating:
Assembly instructions were clear and concise making the dust separator easy to assemble. I used the included hose to attach my 10G 4HP shopvac to the separator and my shopvac hose between the separator and a DeWalt planer. The separator was able to handle the output from the planer with no problem. The separator really saves the shopvac from having to deal with the sizable volume of larger material being created by the planer. Since the separator is translucent, I do not have to guess when it is full.
The only issue I encountered was that my shopvac hose was not a tight fit into the separator inlet port. Not a problem, since Rockler instructions indicated this might be an issue and that some tape around the shopvac hose end would permit a snug fit. All that was required was a couple rounds of cheap 1 ½ inch wide masking tape around the shopvac hose end and the fit was perfect.
The dust separator will pay for itself in no time by reducing the number of filters and bags required for the shopvac. Great addition to a small woodshop .
|
See all
63 reviews...
|
Home  Power Tools and Shop Accessories Dust Collection Dust Collectors, Shop-Vacs and Air Filtration Dust Right® Dust Separator 
|
(0 Items)
