Newest Customer Woodworking Product Reviews

Control plate reversed mount (volume control forward w/ switch reversed) with a 4-position switch and 250k pots. Had to route out neck pocket and bridge pick up hole for upgraded bridge. Replaced nut and after nut height adjustment and truss rod tuning, set action and intonated. Sounds incredible. Vintage relic finish on face with Danish oil on body and neck. 2000grit sanding on fret board. Takes some skill to get these results, not for beginners.

This is a fine product. However, it wasn't designed to store the heavy duty F clamps. The only place they will fit is in the parallel clamp rack.

Pros: Works great. Very accurate on table and miter saw. Made in the USA.  Cons: As someone else commented - eats battery in about 2 weeks even when off. Battery cover is hard to remove.

Nice quality wood, but do not buy if you need a true 1.5" square blank. Mine turned out to be 1 3/8", I wanted it for a shave brush project, but it ended up to be too thin and cracked.

Great saw, very handy for tapered cuts.

Incredibly poor design. The exposed button on the top - or right depending on your orientation - is what gets pressed to set the combination. People want to push buttons and, as a result, the combination gets changed. This has happened twice to us now in the 10 weeks since it was implemented. I do not recommend.

The hose pulls out of the tools I plug it into unless I place the collector right next to the tool I'm using. I have owned it for a few months and after about a month the plastic seams are pulling apart just from the weight as it hangs off the collector intake, so now it is pieced together with duct tape.

I like the idea, but the stop collar is not staying in place on the drill bit.

The tiny design is very unobtrusive, which I really like. I installed the screw-mount version into a teak writing desk and REALLY like the visual results. The desk does roll, which is great, so the mechanics seem right. Also, I am using the desk on a pine floor but haven't had any floor damage, as one other reviewer had, which is great, thanks to the fact that the desk is not particularly heavy, unlike the island in that reviewer's comment. Finally, I do have two suggestions to improve the product: 1} Send the appropriate screws when you ship these casters, 2} This caster is currently noisy because it is a metal ball inside a metal sleeve with no rubber or other lubricating material. I tried adding silicone but it didn't help at all. The noisy casters are okay for occasional use/movement, but if you use the casters regularly, you might want to consider something with rubber that is quiet. Overall, I'm still very pleased with my purchase.